Product Description
If you own a S&W V-Comp Revolver in any caliber we have the replacement sight for you.
Our Dove Tail Front Sights are 0.100" wide and have a red fiber dot of 0.075" diameter. Green fiber may be exchanged
These sights are direct replacements for the S&W factory sights.
You need to drive the old sight out and press the new on in. Some fitting may be required but typically not.
Note: We recommend that you drive the old sight out from right to left as you are looking down the barrel with the gun pointed away.
And the drive the new sight in from left to right. This keeps from passing the sight completely through the dove tail and loosening it up..
These are available in the following heights: 0.219", 0.249", 0.280" 0.312" and 0.352" The height is measured from the bottom of the sight base to the top.
All sight bases are 0.3750 at the widest part of the base and the base angle is approximately 45 degrees.
