On our resources page I've added several search engines for ammo. LINK
We have reworked the 8 shot 38/357 moon clips. They are now made from spring steel. We can make them stiffer than the stainless. LINK
We have added moon clips for the 586/686 7 shot revolvers. The revolver needs to be one of the newer ones designed for moon clips (686+) or an older one with the cylinder cut for moon clips. LINK
Postage rates are scheduled to increase this month. It looks like foreign shipping will increase the most and we will need to increase our rates for those shipments.
Signed up to sponsor the PSA Shootout. If you're in the area you must shoot this match. LINK April 25-28 2013
Application is going up soon. This match sells out.
And we'll again be a sponsor at Walls of Steel LINK
I was looking for a simple handout for the holiday season. I came across small copies of the Constitution and Bill of Rights. So I've been including them in the recent orders. I'm about out and plan to stop then. SO if you missed out look again next next year end
Flat Rate Shipping. We have revised our shipping to make it more reasonable to our customers. We charge $5.00 shipping for all US orders.
Made in the USA. We just finished an audit to be sure all our products were 100% Made in the USA. We passed this first look. All items and components are Made in the USA. But we're not done. We purchase raw material and lesser components such as steel for moon clips and rivets for the moon clip holder. We will be tracking down the sources for everything. If we find a problem be assured the we will change to an American made source. We will be keeping you posted.
We've added a steel moon clip for the 8 shot 357. These are magnetic and work with the holders that have magnets.
Here's a link LINK
In addition to the 8 shot 357, we've added 7 shot 357 Moon Clip Holders. Check them out. LINK
We added a form for traditional Mail Order. If you would rather not use the online payment options here's a LINK.
Many of you have asked about a moon clip holder to 357 magnum rounds. So we put one together. LINK
S&W factory tour. See our write up here Application Notes.
Had several question from newer shooters about cleaning. So we added some info in the Application Notes.
All the Moon Clip Checkers are in house and available for sale. LINK We have 6 shot 625 and 610 and 8 shot 357 and 38 Super.
We now offer custom engraving for the Deluxe Moon Clip Tool LINK Look down the page a bit.
Moon Clip Checkers for the 627 chambered in 8 shot 38 Super and 38/357 are in stock. LINK These checkers let you verify that you loaded moon clip will fit into you cylinder. Now a safer way to test your loaded moon clips.
Shipping rates have gone up. We're trying to keep the free shipping. But international rates will be increasing. We've changes the international shipping program.
Look for our new product announcements. And here's the first. We are now able to customize Moon Clip tool. We can laser etch your name on the red operating handle. We are working on the details so checking for pricing. I expect delivery to take 1 week after you place your order.
We added a redesigned moon clip unloader tool LINK
Check out the MCU-45ACP-3
We added the Original Moon Clip Tool with an arbor for 9MM J frame moon clips. Also you can purchase just the arbor separately.
[24 October 2011]
We've added a stainless steel 9MM J Frame Full Moon Clip. LINK
[20 October 2011]
We've added a stainless steel version of the 45 ACP Full moon clip. LINK
[Fall Notes 2011]
We survived a hurricane, an inferior batch of 9MM moon clips (our fault) and the dog won her go around with a rabid skunk.
One more outdoor match (see left hand panel). The indoor season is starting up.
[20 September 2011]
Happy Birthday to us. We've been doing this officially for a year. Thank you to all our customers.
[12 September 2011]
9mm J Frame (S&W 940) are in final testing. Pricing is finalized and if all goes well will be ready for sale 30 September 2011. Remember when you are comparing prices we offer free shipping!!
[21 August 2011]
Added a miscellaneous parts section. In there we have added scope mounts.
Also added some videos showing the Deluxe Moon CLip Tool in operation very slowly.
[10 August 2011]
We are introducing a moon clip for the S&W model 940. That's a 5 shot J Frame chambered in 9MM. These clips are in final testing and will be available after 15 Sept 2011.
[6 July 2011]
We have lowered the prices on the 8 shot 38/357 moon clips. As the quantities we sell and order from our supplier go up the price is going down. We are passing that savings on to you.
We have finished the testing program and our 45 ACP moon clips are now working in the new S&W Governor.
Just in time for you to spend your new ICORE sign-up bonus. We have some new moon clip unloading tools.
Check out our ICORE promotion. Join ICORE for free. We think it's a good deal.
Joined Northeast Shooters as a dealer. They have a great calendar for New England pistol matches. Also check out Pistol Competition for more information about the area matches.
[27 May 2011]
Posted pictures of what I'll be shooting in the Mini Walls of Steel match (link). And posted video of some of the stages.
[15 April 2011]
Your taxes are due and we've added new products. Check out the Speed loaders for the S&W 617. link
Also the DeluxMoonClipTool is available for our moon clips. link
[27 March 2011]
Keep an eye out here for some new product announcements. Email us for details.
Thanks for stopping by.
Our goal is to provide a place where the revolver enthusiast can find the equipment needed to compete and enjoy the shooting sports.
We're trying to keep everything in stock and will update the products pages if anything is sold out.
Our line card is small and we will be adding to it as the months roll on. So check back often.
If you would like to see items added to our list please drop us a line.
Also send a picture of your favorite revolver and we'll rotate it through so the world can see.
Please no Phase Array weapons at the present time.