Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...

Custom Moon Clip Holder Design

    

      Column  Description

  1. Name of the cartridge.
  2. Number of rounds.
  3. Manufacturer of the moon clip.
  4. Center diameter of the moon clip.
  5. The size of post that will fit the moon clip.
  6. Over all length of the cartridge from Lyman Reloading Manual 47th Edition.
  7. 2 times the overall length: stacking 2 moon clips on each post.
  8. Will you need a Short or Tall Post, XX means that it will not fit.
  9. 3 times the overall length: stacking 3 moon clip on each post.
  10. Will you need a short or Tall Post, XX means that it will not fit.

                              

                                                 Common Combinations of Moon Clips & Moon Clip Holders 

   1 2 3 4 5 6 7 8 9 10
No. 
Cartridge Rounds Moon Clip Center,Dia. Post LOA 2xLOA Short/Tall 3xLOA Short/Tall
1  40 S&W 6     RSC 0.651   5/8 1.135 2.27 Short 3.405 Tall
2 45 ACP 6     RSC 0.577  9/16 1.275 2.55 Short 3.825 --
3 38 Special 7     RSC 0.530   1/2 1.55 3.1 Tall 4.65 --
4 38 Special 8     RSC 0.675   5/8 1.55 3.1 Tall 4.65 --
5 38 Super 8     RSC 0.708   5/8 1.28 2.56 Short 3.84 --
6 38 Super 8      TK 0.608  9/16 1.28 2.56 Short 3.84 --
7 9x19(9 MM) 8     RSC 0.708   5/8 1.17 2.34 Short 3.51 Tall
8 9x19(9 MM) 8      TK 0.608  9/16 1.17 2.34 Short 3.51 Tall
9 LCR 9 5     Ruger 0.352 5/16 1.17 2.34 Short & Tall 3.51 BOTH

 

If you have a moon clip or cartridge that is not listed, or a custom cartridge, fill in the columns 1-7 and 9; you should be able to determine

the size and length of the post that will suit your needs.

**If you have any questions or concerns, just give us a call!**